Decked Transport
For square or
round bales
Bale Capacity - 26
square bales or 8 (2000 lb) round bales
Load Height is 24"
Removable 2.75"
spindle, 8 Bolt Hubs on Rear
2.25" spindle, 8
bolt hubs on front
Grease fittings on
all hubs
Front wheels 22.5 x 8.25 wheels, Rear wheels 22.5 x 11.25
Tricycle type
steering for 90 degree turning
Deck Size
102"x300' (Approx)
Deck Material ⅛"
Diamond Tread Plate
Optional:
Brake
Package
Electric Brakes,
Dual Wheels, Back only
Flairs for Front
and Back, for Round Bale Transporting
Light Kit - Tail,
Stop, Turn (standard with brake version)
Bales must be
properly secured when transporting
Unit is made for
Non-Highway use (30 MPH or less)
Additional Photos
Decked Transport Literature
Back to top of Page
Fifth Wheel Bale
Transport
For Round Bales, Bale Capacity - 8
(2000 lb) Round Bales
Unit has 8 bale cradles, 4 on each side
Cradles have 3½" square tubing
Open bale cradle
design for easy loading of both sides from either side
Main Frame is 4' x
12'
Load Height is 20"
Electric Brakes, dual 16" wheels
Light Kit - Tail,
Stop, Turn (Standard)
Adjustable coupler
with safety chains
10,000 lb Jack
Bales Must be
Properly Secured when Transporting
Unit is Made for
Non-Highway Use (30 MPH or Less)
All fabricated
components are made with high strength alloy steel
Alloy steel
is 3x stronger than mild steel.
Additional Photos
|
|
|
|
|
|
|
|
8 - 2,000 lb Round Bale Capacity |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cradles are not attached to each other only the main beam |
|
|
|
|
|
|
|
|
|
|
|
|
Electric Brakes, Dual Wheels |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Light Kit : Tail, Stop, & Turn |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5th Wheel Transport Literature
Back to top of Page
10 Bale Transport
- 32K
Bale Capacity - 32,000 lbs
5 bale cradles on each side, designed for 2000 lb bales
Standard fenders
(bale guards) on rear wheels
Cradles 3½" square tubing
Main frame 12 x 6 x ½" wall (largest in the
industry)
All fabricated components are made with high
strength alloy steel
Alloy steel is up to 3 times stronger than mild
steel
Removable 3" Spindle (rear)
8 Bolt Hubs (front/rear)
2¾" Spindle (front)
Solid plate center, 8,000 lb wheels
Standard Rims 22.5 x 11.25 Rear, 22.5 x 8.25
Front
Grease Fittings on All Hubs
90 Degree Turning Radius
Quick Hitch Tongue
Optional 2 bale cradle in place of fenders (used when bales are 66"
diameter or less)
Unique Front Box Design for Maximum Strength
Front axle design has greasable king pin &
bushings
Open bale cradle design for easy loading of both sides from either side
Additional Photos
|
|
|
|
|
|
|
|
Front Axle Design has Greasable King Pin & Bushings |
|
|
|
|
|
|
|
|
|
|
|
|
Tricycle Type steering for 90 degree turning, and Fast Hitch |
|
|
|
|
|
|
|
|
|
|
|
|
10 bale with optional 2 bale cradle |
|
|
|
|
|
|
|
|
|
|
|
|
|
Cradles are not connected to each other only the main beam |
|
|
|
|
|
|
|
|
|
|
|
|
|
Removable Rear spindle 2 3/4" |
|
|
|
|
|
|
|
|
|
32K Bale Transport Literature
Back to top of Page
10 Bale Transport
- 24K
Five round bale cradles on each side
Bale capacity - 10 bales @ 6 ft dia. -
22,000 lbs
Cradles are 3½ square tubing
Main frame 12 x 6 x ⅜ wall (largest in the
industry)
All fabricated components are made with high
strength alloy steel
Alloy steel is 3 times stronger than mild
steel
Removable 2¾" Spindle (rear)
• 2 1/4" Spindle (front)
8 Bolt Hubs (rear/front) • Standard
rims 22.5 x 8.25 (front/rear)
Grease fittings on all hubs
90 degree turning radius • Quick
hitch tongue
Standard wheel guard fenders
Optional cradle instead of fenders used when bales are 66" diameter
or less
Unique front box design for maximum strength
Front axle design has greasable king pin &
bushings
Open bale cradle design for easy loading of both sides from either side
Additional Photos
10 Bale Transport Literature
Back to top of Page
8 Bale Transport
Four round bale cradles on each side
Designed for 2000 lb bales - 6' in diameter
Cradles 3½" square tubing
Main Frame 10 x 4
2" Spindle (front) • Removable 2¼" Spindle (rear)
6 Bolt Hubs (front) • 8 Bolt Hubs (rear)
Standard rim 16 x 8 x 6 (front), 16 x 8 x 8 (rear)
Grease fittings on all hubs
90 degree turning radius
Quick hitch tongue
Standard wheel guard fender
Optional cradle in place of fenders for use when bales are 66" in
diameter or less
Front box design for maximum strength
Front axle design has greasable king pin &
bushings
Open bale cradle design for easy loading of both sides from either side
Additional Photos
8 Bale Transport Literature
Back to top of Page
6 Bale Transport - 4 wheels
Three round bale cradles on each side
Designed for 2000 lb bales 48" to 75" in diameter
Cradles 3½" square tubing
Main frame 10" x 4"
2" Spindle (front) • Removable 2"
spindle (rear)
6 Bolt hubs (rear/front)
Standard Rim 16" x 8" (rear/front)
Grease fittings on all hubs
90 degree turning radius
Quick hitch tongue
Standard wheel guard fenders
Optional cradle in place of fenders
Front box design for maximum strength
Front axle design has greaseable king pin &
bushings
Open bale cradle design for easy loading of both sides from either side
Additional Photos
|
|
|
|
|
|
|
|
With Standard Rear Fenders |
|
|
|
|
|
|
|
|
|
|
|
|
Standard Rim 16x8x8 Bolt Front and Rear |
|
|
|
|
|
|
|
|
|
|
Six Bale Transport Literature
Back to top of Page
6 Bale Transport - 2 wheel
Three round bales cradles on each side
Designed for 2000 lb bales 48" to 75" in diameter
Cradles 3½" square tubing
Main frame 10" x 4"
Removable 2¼" spindle (rear)
8 Bolt hubs (rear)
Standard rim 16" x 8" (rear)
T-Post stand standard in front
Storable 5000 lb jack
Grease fittings on all hubs
Standard wheel guard fenders
Optional cradle in place of fenders
Open bale cradle design load both sides from either side
Additional Photos
|
|
|
|
|
|
|
|
With Standard Rear Fenders |
|
|
|
|
|
|
|
|
|
|
|
|
T-Post Stand For Field Loading
Storable 5 Ton Jack |
|
|
|
|
|
|
|
|
|
|
|
|
Removable 2 1/4" Rear Spindle
Rim 16x8x8 Bolt |
|
|
|
|
|
|
|
|
|
Six Bale Transport Literature
Back to top of Page
|
